Save title block

The current title block can be saved from menu bar, toolbar and using the corresponding keyboard shortcut.

One title block is conformed by only one file with the format .titleblock. The .titleblock extension is the native extension from QElectroTech title blocks.

Save title block from menu bar

  1. Select File > Save menu item to save the title block changes.

../../../../_images/qet_title_block_editor_menu_file.png

Figure: QElectroTech title block editor File menu

At the case that the opened title block has to overwrite an existing title block or it has to be saved as new title block:

  1. Select File > Save as menu item to display Save as title block PopUP window.

../../../../_images/qet_title_block_save_as_popup_window.png

Figure: QElectroTech Save as title block PopUP window

  1. Select the title block which should be overwritten or the parent collection and the name for the new title block.

  2. Press OK button to save the title block and close the PopUP window.

The title block can also be directly saved as a new file in the Hard Disk directory desired:

  1. Select File > Save to a file menu item to display the File system PopUp window.

  2. Select the directory and the name from the title block file.

  3. Press OK button to save the title block and close the PopUP window.

Save title block from toolbar

  1. Select icon icon_save from toolbar to save title block changes.

At the case that the opened title block has to overwrite an existing title block or it has to be saved as new title block:

  1. Select icon icon_save_as from toolbar to display the Save as title block PopUP window.

../../../../_images/qet_title_block_save_as_popup_window.png

Figure: QElectroTech Save as title block PopUP window

  1. Select the title block which should be overwrited or the parent collection and the name for the new title block.

  2. Press OK button to save the title block and close the PopUP window.

Note

If the toolbar is not displayed, it can be displayed from Settings > Display > Tools.

Save title block using keyboard shortcut

QElectroTech allows using keyboard shortcut to increase the working efficiency.

  1. Press Ctrl + s to save the title block changes.

The title block can also be directly saved as a new file in the Hard Disk directory desired:

  1. Press Ctrl + Shift + s to display the File system PopUp window.

  2. Select the directory and the name from the title block file.

  3. Press OK button to save the title block and close the PopUP window.

See also

For more information about QElectroTech keyboard shortcut, refer to Menu bar section.