Paste in area

Past in area is similar command to paste part, the main difference is the place where the part can be pasted. At normal paste command QElectroTech pastes the part automatically at a predefined position, at paste in area command the user is free to choose the place where the object has to be pasted by using left click on the desired place.

Pasting parts in area can be done from menu bar, by right click on the drawing area and from the corresponding keyboard shortcut.

Paste part from menu bar

1. Select Edit > Paste in the area… menu item to paste the part copied or cut previously from drawing area.

2. Left click at the Drawing area point where the part should be pasted.

Figure: QElectroTech Edit menu

Paste part by right click

1. Right click somewhere from drawing area.

2. Select the option Paste in the area… to paste the part copied or cut previously.

3. Left click at the drawing area point where the part should be pasted.

Figure: QElectroTech right click PopUp window

Paste part using keyboard shortcut

QElectroTech allows using keyboard shortcut to increase the working efficiency.

1. Press Ctrl + Shift + v to paste the part copied or cut previously from drawing area.

2. Left click at the Drawing area point where the part should be pasted.

See also

For more information about QElectroTech keyboard shortcut, refer to menu bar section.