[15:04:37] laurent@debian:~$ sudo dmesg -wH [sudo] Mot de passe de laurent :  [août11 15:00] Linux version 4.12.5-vanilla (root@debian) (gcc version 7.1.0 (Debian 7.1.0-13) ) #1 SMP Fri Aug 11 04:41:04 CEST 2017 [ +0,000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.5-vanilla root=UUID=4a3bb5a6-9666-4e2f-85b5-5ce1c9c7f738 ro quiet [ +0,000000] KERNEL supported cpus: [ +0,000000] AMD AuthenticAMD [ +0,000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ +0,000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ +0,000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ +0,000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ +0,000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ +0,000000] e820: BIOS-provided physical RAM map: [ +0,000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ +0,000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ +0,000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable [ +0,000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved [ +0,000000] BIOS-e820: [mem 0x000000000a000000-0x00000000dd278fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000dd279000-0x00000000dd3b9fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000dd3ba000-0x00000000dd4aefff] usable [ +0,000000] BIOS-e820: [mem 0x00000000dd4af000-0x00000000dd885fff] ACPI NVS [ +0,000000] BIOS-e820: [mem 0x00000000dd886000-0x00000000de3e8fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000de3e9000-0x00000000deffffff] usable [ +0,000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable [ +0,000000] NX (Execute Disable) protection: active [ +0,000000] SMBIOS 3.0 present. [ +0,000000] DMI: Micro-Star International Co., Ltd MS-7A34/B350 TOMAHAWK (MS-7A34), BIOS 1.72 07/26/2017 [ +0,000000] tsc: Fast TSC calibration failed [ +0,000000] tsc: Using PIT calibration value [ +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ +0,000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ +0,000000] e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000 [ +0,000000] MTRR default type: uncachable [ +0,000000] MTRR fixed ranges enabled: [ +0,000000] 00000-9FFFF write-back [ +0,000000] A0000-BFFFF write-through [ +0,000000] C0000-FFFFF write-protect [ +0,000000] MTRR variable ranges enabled: [ +0,000000] 0 base 000000000000 mask FFFF80000000 write-back [ +0,000000] 1 base 000080000000 mask FFFFC0000000 write-back [ +0,000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ +0,000000] 3 base 0000DF000000 mask FFFFFF000000 uncachable [ +0,000000] 4 disabled [ +0,000000] 5 disabled [ +0,000000] 6 disabled [ +0,000000] 7 disabled [ +0,000000] TOM2: 0000000420000000 aka 16896M [ +0,000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ +0,000000] e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved [ +0,000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ +0,000000] Base memory trampoline at [ffff90dfc0097000] 97000 size 24576 [ +0,000000] Using GB pages for direct mapping [ +0,000000] BRK [0x286f3f000, 0x286f3ffff] PGTABLE [ +0,000000] BRK [0x286f40000, 0x286f40fff] PGTABLE [ +0,000000] BRK [0x286f41000, 0x286f41fff] PGTABLE [ +0,000000] BRK [0x286f42000, 0x286f42fff] PGTABLE [ +0,000000] BRK [0x286f43000, 0x286f43fff] PGTABLE [ +0,000000] BRK [0x286f44000, 0x286f44fff] PGTABLE [ +0,000000] BRK [0x286f45000, 0x286f45fff] PGTABLE [ +0,000000] BRK [0x286f46000, 0x286f46fff] PGTABLE [ +0,000000] BRK [0x286f47000, 0x286f47fff] PGTABLE [ +0,000000] BRK [0x286f48000, 0x286f48fff] PGTABLE [ +0,000000] BRK [0x286f49000, 0x286f49fff] PGTABLE [ +0,000000] RAMDISK: [mem 0x35a8f000-0x36d3efff] [ +0,000000] ACPI: Early table checksum verification disabled [ +0,000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) [ +0,000000] ACPI: XSDT 0x00000000DD4AF090 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013) [ +0,000000] ACPI: FACP 0x00000000DD4B4FB0 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ +0,000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-658) [ +0,000000] ACPI: DSDT 0x00000000DD4AF1D0 005DDA (v02 ALASKA A M I 01072009 INTL 20120913) [ +0,000000] ACPI: FACS 0x00000000DD86FE00 000040 [ +0,000000] ACPI: APIC 0x00000000DD4B50C8 0000DE (v03 ALASKA A M I 01072009 AMI 00010013) [ +0,000000] ACPI: FPDT 0x00000000DD4B51A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ +0,000000] ACPI: FIDT 0x00000000DD4B51F0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ +0,000000] ACPI: SSDT 0x00000000DD4B5290 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000) [ +0,000000] ACPI: SSDT 0x00000000DD4BDEE0 001BF4 (v01 AMD AMD CPU 00000001 AMD 00000001) [ +0,000000] ACPI: CRAT 0x00000000DD4BFAD8 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ +0,000000] ACPI: CDIT 0x00000000DD4C0A28 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ +0,000000] ACPI: SSDT 0x00000000DD4C0A58 0017D2 (v01 AMD AMD AOD 00000001 INTL 20120913) [ +0,000000] ACPI: MCFG 0x00000000DD4C2230 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ +0,000000] ACPI: HPET 0x00000000DD4C2270 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ +0,000000] ACPI: SSDT 0x00000000DD4C22A8 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913) [ +0,000000] ACPI: UEFI 0x00000000DD4C22D0 000042 (v01 00000000 00000000) [ +0,000000] ACPI: IVRS 0x00000000DD4C2318 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) [ +0,000000] ACPI: SSDT 0x00000000DD4C23E8 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913) [ +0,000000] ACPI: SSDT 0x00000000DD4C24E0 001664 (v01 AMD CPMCMN 00000001 INTL 20120913) [ +0,000000] ACPI: Local APIC address 0xfee00000 [ +0,000000] system APIC only can use physical flat [ +0,000000] Setting APIC routing to physical flat. [ +0,000000] No NUMA configuration found [ +0,000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff] [ +0,000000] NODE_DATA(0) allocated [mem 0x41f37b000-0x41f37ffff] [ +0,000000] Zone ranges: [ +0,000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ +0,000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ +0,000000] Normal [mem 0x0000000100000000-0x000000041f37ffff] [ +0,000000] Device empty [ +0,000000] Movable zone start for each node [ +0,000000] Early memory node ranges [ +0,000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ +0,000000] node 0: [mem 0x0000000000100000-0x0000000009d7ffff] [ +0,000000] node 0: [mem 0x000000000a000000-0x00000000dd278fff] [ +0,000000] node 0: [mem 0x00000000dd3ba000-0x00000000dd4aefff] [ +0,000000] node 0: [mem 0x00000000de3e9000-0x00000000deffffff] [ +0,000000] node 0: [mem 0x0000000100000000-0x000000041f37ffff] [ +0,000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff] [ +0,000000] On node 0 totalpages: 4182049 [ +0,000000] DMA zone: 64 pages used for memmap [ +0,000000] DMA zone: 21 pages reserved [ +0,000000] DMA zone: 3996 pages, LIFO batch:0 [ +0,000000] DMA32 zone: 14133 pages used for memmap [ +0,000000] DMA32 zone: 904453 pages, LIFO batch:31 [ +0,000000] Normal zone: 51150 pages used for memmap [ +0,000000] Normal zone: 3273600 pages, LIFO batch:31 [ +0,000000] ACPI: PM-Timer IO Port: 0x808 [ +0,000000] ACPI: Local APIC address 0xfee00000 [ +0,000000] system APIC only can use physical flat [ +0,000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ +0,000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23 [ +0,000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55 [ +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ +0,000000] ACPI: IRQ0 used by override. [ +0,000000] ACPI: IRQ9 used by override. [ +0,000000] Using ACPI (MADT) for SMP configuration information [ +0,000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ +0,000000] smpboot: Allowing 16 CPUs, 0 hotplug CPUs [ +0,000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ +0,000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ +0,000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ +0,000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ +0,000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ +0,000000] PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff] [ +0,000000] PM: Registered nosave memory: [mem 0xdd279000-0xdd3b9fff] [ +0,000000] PM: Registered nosave memory: [mem 0xdd4af000-0xdd885fff] [ +0,000000] PM: Registered nosave memory: [mem 0xdd886000-0xde3e8fff] [ +0,000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff] [ +0,000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ +0,000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] [ +0,000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ +0,000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff] [ +0,000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ +0,000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ +0,000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] [ +0,000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] [ +0,000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] [ +0,000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff] [ +0,000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ +0,000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ +0,000000] Booting paravirtualized kernel on bare hardware [ +0,000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ +0,000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1 [ +0,000000] percpu: Embedded 38 pages/cpu @ffff90e3ce600000 s114776 r8192 d32680 u262144 [ +0,000000] pcpu-alloc: s114776 r8192 d32680 u262144 alloc=1*2097152 [ +0,000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ +0,000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4116681 [ +0,000000] Policy zone: Normal [ +0,000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.5-vanilla root=UUID=4a3bb5a6-9666-4e2f-85b5-5ce1c9c7f738 ro quiet [ +0,000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ +0,000000] Calgary: detecting Calgary via BIOS EBDA area [ +0,000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ +0,000000] Memory: 16362704K/16728196K available (6309K kernel code, 1107K rwdata, 2812K rodata, 1432K init, 696K bss, 365492K reserved, 0K cma-reserved) [ +0,000000] ftrace: allocating 27525 entries in 108 pages [ +0,000000] Hierarchical RCU implementation. [ +0,000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16. [ +0,000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ +0,000000] NR_IRQS:33024 nr_irqs:1096 16 [ +0,000000] Offload RCU callbacks from all CPUs [ +0,000000] Offload RCU callbacks from CPUs: 0-15. [ +0,000000] spurious 8259A interrupt: IRQ7. [ +0,000000] Console: colour VGA+ 80x25 [ +0,000000] console [tty0] enabled [ +0,000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ +0,000000] hpet clockevent registered [ +0,000000] tsc: Fast TSC calibration failed [ +0,000000] tsc: PIT calibration matches HPET. 1 loops [ +0,000000] tsc: Detected 3399.794 MHz processor [ +0,000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.58 BogoMIPS (lpj=13599176) [ +0,000000] pid_max: default: 32768 minimum: 301 [ +0,000000] ACPI: Core revision 20170303 [ +0,008101] ACPI: 7 ACPI AML tables successfully acquired and loaded [ +0,000041] Security Framework initialized [ +0,000001] Yama: becoming mindful. [ +0,000003] AppArmor: AppArmor disabled by boot time parameter [ +0,000385] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ +0,002229] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ +0,001017] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ +0,000009] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ +0,000241] CPU: Physical Processor ID: 0 [ +0,000000] CPU: Processor Core ID: 0 [ +0,000006] mce: CPU supports 23 MCE banks [ +0,000018] LVT offset 1 assigned for vector 0xf9 [ +0,000114] LVT offset 2 assigned for vector 0xf4 [ +0,000011] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ +0,000000] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ +0,000159] Freeing SMP alternatives memory: 24K [ +0,003714] smpboot: Max logical packages: 2 [ +0,004727] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ +0,043224] smpboot: CPU0: AMD Ryzen 7 1700X Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1) [ +0,000000] Performance Events: Fam17h core perfctr, AMD PMU driver. [ +0,000000] ... version: 0 [ +0,000000] ... bit width: 48 [ +0,000000] ... generic registers: 6 [ +0,000000] ... value mask: 0000ffffffffffff [ +0,000000] ... max period: 00007fffffffffff [ +0,000000] ... fixed-purpose events: 0 [ +0,000000] ... event mask: 000000000000003f [ +0,000000] smp: Bringing up secondary CPUs ... [ +0,000000] x86: Booting SMP configuration: [ +0,000000] .... node #0, CPUs: #1 [ +0,000149] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ +0,041873] #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 [ +0,615997] smp: Brought up 1 node, 16 CPUs [ +0,000000] smpboot: Total of 16 processors activated (108425.44 BogoMIPS) [ +0,000000] sched_clock: Marking stable (724000000, 0)->(989094827, -265094827) [ -0,000190] devtmpfs: initialized [ +0,000038] x86/mm: Memory block size: 128MB [ +0,002574] PM: Registering ACPI NVS region [mem 0xdd4af000-0xdd885fff] (4026368 bytes) [ +0,000123] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ +0,000019] futex hash table entries: 4096 (order: 6, 262144 bytes) [ +0,000088] pinctrl core: initialized pinctrl subsystem [ +0,000107] NET: Registered protocol family 16 [ +0,000129] cpuidle: using governor ladder [ +0,000029] cpuidle: using governor menu [ +0,000002] PCCT header not found. [ +0,000130] ACPI: bus type PCI registered [ +0,000001] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ +0,000047] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ +0,000001] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ +0,000006] PCI: Using configuration type 1 for base access [ +0,000490] mtrr: your CPUs had inconsistent variable MTRR settings [ +0,000000] mtrr: probably your BIOS does not setup all CPUs. [ +0,000000] mtrr: corrected configuration. [ +0,000467] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ +0,000001] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ +0,000244] ACPI: Added _OSI(Module Device) [ +0,000000] ACPI: Added _OSI(Processor Device) [ +0,000001] ACPI: Added _OSI(3.0 _SCP Extensions) [ +0,000000] ACPI: Added _OSI(Processor Aggregator Device) [ +0,000140] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ +0,000011] ACPI: Executed 2 blocks of module-level executable AML code [ +0,005805] ACPI: Interpreter enabled [ +0,000011] ACPI: (supports S0 S3 S4 S5) [ +0,000001] ACPI: Using IOAPIC for interrupt routing [ +0,000105] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ +0,006043] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ +0,000003] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ +0,000155] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ +0,000008] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ +0,000233] PCI host bridge to bus 0000:00 [ +0,000001] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ +0,000001] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ +0,000001] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ +0,000001] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ +0,000001] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ +0,000001] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ +0,000001] pci_bus 0000:00: root bus resource [bus 00-ff] [ +0,000005] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 [ +0,000063] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 [ +0,000080] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ +0,000054] pci 0000:00:01.1: [1022:1453] type 01 class 0x060400 [ +0,000042] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ +0,000036] pci 0000:00:01.1: System wakeup disabled by ACPI [ +0,000020] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 [ +0,000041] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ +0,000035] pci 0000:00:01.3: System wakeup disabled by ACPI [ +0,000027] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 [ +0,000068] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 [ +0,000055] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 [ +0,000060] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ +0,000043] pci 0000:00:03.1: System wakeup disabled by ACPI [ +0,000030] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 [ +0,000072] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 [ +0,000053] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 [ +0,000034] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ +0,000028] pci 0000:00:07.1: System wakeup disabled by ACPI [ +0,000030] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ +0,000053] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 [ +0,000036] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ +0,000028] pci 0000:00:08.1: System wakeup disabled by ACPI [ +0,000066] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ +0,000196] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ +0,000198] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 [ +0,000043] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 [ +0,000042] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 [ +0,000043] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 [ +0,000043] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 [ +0,000043] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 [ +0,000042] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 [ +0,000043] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 [ +0,000091] pci 0000:01:00.0: [144d:a804] type 00 class 0x010802 [ +0,000017] pci 0000:01:00.0: reg 0x10: [mem 0xfd800000-0xfd803fff 64bit] [ +0,011289] pci 0000:00:01.1: PCI bridge to [bus 01] [ +0,000004] pci 0000:00:01.1: bridge window [mem 0xfd800000-0xfd8fffff] [ +0,000040] pci 0000:03:00.0: [1022:43bb] type 00 class 0x0c0330 [ +0,000017] pci 0000:03:00.0: reg 0x10: [mem 0xfd6a0000-0xfd6a7fff 64bit] [ +0,000069] pci 0000:03:00.0: PME# supported from D3hot D3cold [ +0,000031] pci 0000:03:00.0: System wakeup disabled by ACPI [ +0,000024] pci 0000:03:00.1: [1022:43b7] type 00 class 0x010601 [ +0,000040] pci 0000:03:00.1: reg 0x24: [mem 0xfd680000-0xfd69ffff] [ +0,000006] pci 0000:03:00.1: reg 0x30: [mem 0xfd600000-0xfd67ffff pref] [ +0,000035] pci 0000:03:00.1: PME# supported from D3hot D3cold [ +0,000036] pci 0000:03:00.2: [1022:43b2] type 01 class 0x060400 [ +0,000064] pci 0000:03:00.2: PME# supported from D3hot D3cold [ +0,011634] pci 0000:00:01.3: PCI bridge to [bus 03-22] [ +0,000002] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] [ +0,000002] pci 0000:00:01.3: bridge window [mem 0xfd500000-0xfd6fffff] [ +0,000050] pci 0000:04:00.0: [1022:43b4] type 01 class 0x060400 [ +0,000075] pci 0000:04:00.0: PME# supported from D3hot D3cold [ +0,000025] pci 0000:04:00.0: System wakeup disabled by ACPI [ +0,000025] pci 0000:04:01.0: [1022:43b4] type 01 class 0x060400 [ +0,000074] pci 0000:04:01.0: PME# supported from D3hot D3cold [ +0,000024] pci 0000:04:01.0: System wakeup disabled by ACPI [ +0,000028] pci 0000:04:04.0: [1022:43b4] type 01 class 0x060400 [ +0,000074] pci 0000:04:04.0: PME# supported from D3hot D3cold [ +0,000059] pci 0000:03:00.2: PCI bridge to [bus 04-22] [ +0,000004] pci 0000:03:00.2: bridge window [io 0xf000-0xffff] [ +0,000003] pci 0000:03:00.2: bridge window [mem 0xfd500000-0xfd5fffff] [ +0,000053] pci 0000:1f:00.0: [1b21:1080] type 01 class 0x060400 [ +0,000164] pci 0000:1f:00.0: supports D1 D2 [ +0,000001] pci 0000:1f:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ +0,011340] pci 0000:04:00.0: PCI bridge to [bus 1f-20] [ +0,000143] pci 0000:1f:00.0: PCI bridge to [bus 20] [ +0,000081] pci 0000:21:00.0: [10ec:8168] type 00 class 0x020000 [ +0,000032] pci 0000:21:00.0: reg 0x10: [io 0xf000-0xf0ff] [ +0,000035] pci 0000:21:00.0: reg 0x18: [mem 0xfd504000-0xfd504fff 64bit] [ +0,000021] pci 0000:21:00.0: reg 0x20: [mem 0xfd500000-0xfd503fff 64bit] [ +0,000118] pci 0000:21:00.0: supports D1 D2 [ +0,000001] pci 0000:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ +0,011584] pci 0000:04:01.0: PCI bridge to [bus 21] [ +0,000004] pci 0000:04:01.0: bridge window [io 0xf000-0xffff] [ +0,000003] pci 0000:04:01.0: bridge window [mem 0xfd500000-0xfd5fffff] [ +0,000035] pci 0000:04:04.0: PCI bridge to [bus 22] [ +0,000066] pci 0000:23:00.0: [10de:104a] type 00 class 0x030000 [ +0,000017] pci 0000:23:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff] [ +0,000012] pci 0000:23:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] [ +0,000012] pci 0000:23:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ +0,000007] pci 0000:23:00.0: reg 0x24: [io 0xe000-0xe07f] [ +0,000008] pci 0000:23:00.0: reg 0x30: [mem 0xfd000000-0xfd07ffff pref] [ +0,000097] pci 0000:23:00.1: [10de:0e08] type 00 class 0x040300 [ +0,000014] pci 0000:23:00.1: reg 0x10: [mem 0xfd080000-0xfd083fff] [ +0,011712] pci 0000:00:03.1: PCI bridge to [bus 23] [ +0,000003] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ +0,000002] pci 0000:00:03.1: bridge window [mem 0xfc000000-0xfd0fffff] [ +0,000003] pci 0000:00:03.1: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ +0,000036] pci 0000:24:00.0: [1022:145a] type 00 class 0x130000 [ +0,000070] pci 0000:24:00.2: [1022:1456] type 00 class 0x108000 [ +0,000013] pci 0000:24:00.2: reg 0x18: [mem 0xfd300000-0xfd3fffff] [ +0,000009] pci 0000:24:00.2: reg 0x24: [mem 0xfd400000-0xfd401fff] [ +0,000053] pci 0000:24:00.3: [1022:145c] type 00 class 0x0c0330 [ +0,000009] pci 0000:24:00.3: reg 0x10: [mem 0xfd200000-0xfd2fffff 64bit] [ +0,000037] pci 0000:24:00.3: PME# supported from D0 D3hot D3cold [ +0,000012] pci 0000:24:00.3: System wakeup disabled by ACPI [ +0,000029] pci 0000:00:07.1: PCI bridge to [bus 24] [ +0,000003] pci 0000:00:07.1: bridge window [mem 0xfd200000-0xfd4fffff] [ +0,000038] pci 0000:25:00.0: [1022:1455] type 00 class 0x130000 [ +0,000073] pci 0000:25:00.2: [1022:7901] type 00 class 0x010601 [ +0,000024] pci 0000:25:00.2: reg 0x24: [mem 0xfd708000-0xfd708fff] [ +0,000028] pci 0000:25:00.2: PME# supported from D3hot D3cold [ +0,000030] pci 0000:25:00.3: [1022:1457] type 00 class 0x040300 [ +0,000008] pci 0000:25:00.3: reg 0x10: [mem 0xfd700000-0xfd707fff] [ +0,000042] pci 0000:25:00.3: PME# supported from D0 D3hot D3cold [ +0,000044] pci 0000:00:08.1: PCI bridge to [bus 25] [ +0,000003] pci 0000:00:08.1: bridge window [mem 0xfd700000-0xfd7fffff] [ +0,000306] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ +0,000042] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ +0,000036] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ +0,000046] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ +0,000041] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ +0,000034] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ +0,000033] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ +0,000033] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ +0,000359] pci 0000:23:00.0: vgaarb: setting as boot VGA device [ +0,000002] pci 0000:23:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ +0,000001] pci 0000:23:00.0: vgaarb: bridge control possible [ +0,000001] vgaarb: loaded [ +0,000030] EDAC MC: Ver: 3.0.0 [ +0,000123] PCI: Using ACPI for IRQ routing [ +0,002794] PCI: pci_cache_line_size set to 64 bytes [ +0,000058] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ +0,000001] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff] [ +0,000000] e820: reserve RAM buffer [mem 0xdd279000-0xdfffffff] [ +0,000001] e820: reserve RAM buffer [mem 0xdd4af000-0xdfffffff] [ +0,000000] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ +0,000001] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff] [ +0,000110] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ +0,000002] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ +0,002044] clocksource: Switched to clocksource hpet [ +0,006764] VFS: Disk quotas dquot_6.6.0 [ +0,000015] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ +0,000051] pnp: PnP ACPI init [ +0,000073] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ +0,000002] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ +0,000045] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved [ +0,000001] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ +0,000064] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ +0,000134] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ +0,000001] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ +0,000000] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ +0,000001] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ +0,000002] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ +0,000211] pnp 00:04: [dma 0 disabled] [ +0,000072] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ +0,000169] pnp 00:05: [dma 0 disabled] [ +0,000027] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ +0,000146] system 00:06: [io 0x04d0-0x04d1] has been reserved [ +0,000001] system 00:06: [io 0x040b] has been reserved [ +0,000001] system 00:06: [io 0x04d6] has been reserved [ +0,000001] system 00:06: [io 0x0c00-0x0c01] has been reserved [ +0,000001] system 00:06: [io 0x0c14] has been reserved [ +0,000001] system 00:06: [io 0x0c50-0x0c51] has been reserved [ +0,000001] system 00:06: [io 0x0c52] has been reserved [ +0,000000] system 00:06: [io 0x0c6c] has been reserved [ +0,000001] system 00:06: [io 0x0c6f] has been reserved [ +0,000001] system 00:06: [io 0x0cd0-0x0cd1] has been reserved [ +0,000001] system 00:06: [io 0x0cd2-0x0cd3] has been reserved [ +0,000001] system 00:06: [io 0x0cd4-0x0cd5] has been reserved [ +0,000001] system 00:06: [io 0x0cd6-0x0cd7] has been reserved [ +0,000001] system 00:06: [io 0x0cd8-0x0cdf] has been reserved [ +0,000000] system 00:06: [io 0x0800-0x089f] has been reserved [ +0,000001] system 00:06: [io 0x0b00-0x0b0f] has been reserved [ +0,000001] system 00:06: [io 0x0b20-0x0b3f] has been reserved [ +0,000001] system 00:06: [io 0x0900-0x090f] has been reserved [ +0,000001] system 00:06: [io 0x0910-0x091f] has been reserved [ +0,000001] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ +0,000001] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved [ +0,000001] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved [ +0,000001] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ +0,000001] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved [ +0,000001] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved [ +0,000001] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ +0,000001] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ +0,000260] pnp: PnP ACPI: found 7 devices [ +0,006281] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ +0,000056] pci 0000:00:01.1: PCI bridge to [bus 01] [ +0,000003] pci 0000:00:01.1: bridge window [mem 0xfd800000-0xfd8fffff] [ +0,000004] pci 0000:1f:00.0: PCI bridge to [bus 20] [ +0,000020] pci 0000:04:00.0: PCI bridge to [bus 1f-20] [ +0,000009] pci 0000:04:01.0: PCI bridge to [bus 21] [ +0,000001] pci 0000:04:01.0: bridge window [io 0xf000-0xffff] [ +0,000004] pci 0000:04:01.0: bridge window [mem 0xfd500000-0xfd5fffff] [ +0,000006] pci 0000:04:04.0: PCI bridge to [bus 22] [ +0,000008] pci 0000:03:00.2: PCI bridge to [bus 04-22] [ +0,000002] pci 0000:03:00.2: bridge window [io 0xf000-0xffff] [ +0,000003] pci 0000:03:00.2: bridge window [mem 0xfd500000-0xfd5fffff] [ +0,000005] pci 0000:00:01.3: PCI bridge to [bus 03-22] [ +0,000001] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] [ +0,000002] pci 0000:00:01.3: bridge window [mem 0xfd500000-0xfd6fffff] [ +0,000004] pci 0000:00:03.1: PCI bridge to [bus 23] [ +0,000001] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ +0,000002] pci 0000:00:03.1: bridge window [mem 0xfc000000-0xfd0fffff] [ +0,000002] pci 0000:00:03.1: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ +0,000004] pci 0000:00:07.1: PCI bridge to [bus 24] [ +0,000001] pci 0000:00:07.1: bridge window [mem 0xfd200000-0xfd4fffff] [ +0,000004] pci 0000:00:08.1: PCI bridge to [bus 25] [ +0,000002] pci 0000:00:08.1: bridge window [mem 0xfd700000-0xfd7fffff] [ +0,000003] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ +0,000001] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ +0,000001] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ +0,000001] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ +0,000001] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ +0,000000] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ +0,000001] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ +0,000001] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ +0,000001] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff] [ +0,000001] pci_bus 0000:03: resource 0 [io 0xf000-0xffff] [ +0,000000] pci_bus 0000:03: resource 1 [mem 0xfd500000-0xfd6fffff] [ +0,000001] pci_bus 0000:04: resource 0 [io 0xf000-0xffff] [ +0,000001] pci_bus 0000:04: resource 1 [mem 0xfd500000-0xfd5fffff] [ +0,000001] pci_bus 0000:21: resource 0 [io 0xf000-0xffff] [ +0,000000] pci_bus 0000:21: resource 1 [mem 0xfd500000-0xfd5fffff] [ +0,000001] pci_bus 0000:23: resource 0 [io 0xe000-0xefff] [ +0,000001] pci_bus 0000:23: resource 1 [mem 0xfc000000-0xfd0fffff] [ +0,000000] pci_bus 0000:23: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref] [ +0,000001] pci_bus 0000:24: resource 1 [mem 0xfd200000-0xfd4fffff] [ +0,000001] pci_bus 0000:25: resource 1 [mem 0xfd700000-0xfd7fffff] [ +0,000055] NET: Registered protocol family 2 [ +0,000155] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ +0,000141] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ +0,000105] TCP: Hash tables configured (established 131072 bind 65536) [ +0,000036] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ +0,000031] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ +0,000065] NET: Registered protocol family 1 [ +0,000144] pci 0000:23:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ +0,000755] PCI: CLS 64 bytes, default 64 [ +0,000044] Unpacking initramfs... [ +0,235687] Freeing initrd memory: 19136K [ +0,000046] AMD-Vi: IOMMU performance counters supported [ +0,000075] pci 0000:00:00.2: can't derive routing for PCI INT A [ +0,000001] pci 0000:00:00.2: PCI INT A: not connected [ +0,000260] iommu: Adding device 0000:00:01.0 to group 0 [ +0,000109] iommu: Adding device 0000:00:01.1 to group 1 [ +0,000106] iommu: Adding device 0000:00:01.3 to group 2 [ +0,000103] iommu: Adding device 0000:00:02.0 to group 3 [ +0,000109] iommu: Adding device 0000:00:03.0 to group 4 [ +0,000104] iommu: Adding device 0000:00:03.1 to group 5 [ +0,000109] iommu: Adding device 0000:00:04.0 to group 6 [ +0,000112] iommu: Adding device 0000:00:07.0 to group 7 [ +0,000013] iommu: Adding device 0000:00:07.1 to group 7 [ +0,000110] iommu: Adding device 0000:00:08.0 to group 8 [ +0,000014] iommu: Adding device 0000:00:08.1 to group 8 [ +0,000109] iommu: Adding device 0000:00:14.0 to group 9 [ +0,000013] iommu: Adding device 0000:00:14.3 to group 9 [ +0,000124] iommu: Adding device 0000:00:18.0 to group 10 [ +0,000013] iommu: Adding device 0000:00:18.1 to group 10 [ +0,000012] iommu: Adding device 0000:00:18.2 to group 10 [ +0,000012] iommu: Adding device 0000:00:18.3 to group 10 [ +0,000011] iommu: Adding device 0000:00:18.4 to group 10 [ +0,000011] iommu: Adding device 0000:00:18.5 to group 10 [ +0,000012] iommu: Adding device 0000:00:18.6 to group 10 [ +0,000012] iommu: Adding device 0000:00:18.7 to group 10 [ +0,000107] iommu: Adding device 0000:01:00.0 to group 11 [ +0,000122] iommu: Adding device 0000:03:00.0 to group 12 [ +0,000021] iommu: Adding device 0000:03:00.1 to group 12 [ +0,000018] iommu: Adding device 0000:03:00.2 to group 12 [ +0,000011] iommu: Adding device 0000:04:00.0 to group 12 [ +0,000012] iommu: Adding device 0000:04:01.0 to group 12 [ +0,000010] iommu: Adding device 0000:04:04.0 to group 12 [ +0,000012] iommu: Adding device 0000:1f:00.0 to group 12 [ +0,000019] iommu: Adding device 0000:21:00.0 to group 12 [ +0,000117] iommu: Adding device 0000:23:00.0 to group 13 [ +0,000022] iommu: Adding device 0000:23:00.1 to group 13 [ +0,000009] iommu: Adding device 0000:24:00.0 to group 7 [ +0,000010] iommu: Adding device 0000:24:00.2 to group 7 [ +0,000008] iommu: Adding device 0000:24:00.3 to group 7 [ +0,000010] iommu: Adding device 0000:25:00.0 to group 8 [ +0,000008] iommu: Adding device 0000:25:00.2 to group 8 [ +0,000009] iommu: Adding device 0000:25:00.3 to group 8 [ +0,000201] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ +0,000001] AMD-Vi: Extended features (0xf77ef22294ada): [ +0,000000] PPR NX GT IA GA PC GA_vAPIC [ +0,000003] AMD-Vi: Interrupt remapping enabled [ +0,000000] AMD-Vi: virtual APIC enabled [ +0,000092] AMD-Vi: Lazy IO/TLB flushing enabled [ +0,000835] amd_uncore: AMD NB counters detected [ +0,000003] amd_uncore: AMD LLC counters detected [ +0,000674] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ +0,000278] audit: initializing netlink subsys (disabled) [ +0,000060] audit: type=2000 audit(1502456451.067:1): state=initialized audit_enabled=0 res=1 [ +0,000201] Initialise system trusted keyrings [ +0,000044] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ +0,000331] zbud: loaded [ +0,024497] Key type asymmetric registered [ +0,000001] Asymmetric key parser 'x509' registered [ +0,000007] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ +0,000063] io scheduler noop registered [ +0,000001] io scheduler deadline registered [ +0,000008] io scheduler cfq registered (default) [ +0,000000] io scheduler mq-deadline registered [ +0,000001] io scheduler kyber registered [ +0,001130] pcieport 0000:00:01.1: AER enabled with IRQ 26 [ +0,000021] pcieport 0000:00:01.3: AER enabled with IRQ 27 [ +0,000016] pcieport 0000:00:03.1: AER enabled with IRQ 28 [ +0,000008] pcieport 0000:00:01.1: Signaling PME with IRQ 26 [ +0,000006] pcieport 0000:00:01.3: Signaling PME with IRQ 27 [ +0,000009] pcieport 0000:00:03.1: Signaling PME with IRQ 28 [ +0,000011] AMD-Vi: Event logged [ [ +0,000001] pcieport 0000:00:07.1: Signaling PME with IRQ 29 [ +0,000021] pcieport 0000:00:08.1: Signaling PME with IRQ 31 [ +0,000059] INVALID_DEVICE_REQUEST device=00:00.0 address=0xfffffffdf8000000 flags=0x0a00] [ +0,001179] GHES: HEST is not enabled! [ +0,000048] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ +0,020862] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ +0,000295] Linux agpgart interface v0.103 [ +0,000167] AMD IOMMUv2 driver by Joerg Roedel [ +0,001065] i8042: PNP: No PS/2 controller found. [ +0,000065] mousedev: PS/2 mouse device common for all mice [ +0,000033] rtc_cmos 00:02: RTC can wake from S4 [ +0,000197] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ +0,000053] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ +0,000334] ledtrig-cpu: registered to indicate activity on CPUs [ +0,000231] NET: Registered protocol family 10 [ +0,000176] Segment Routing with IPv6 [ +0,000008] mip6: Mobile IPv6 [ +0,000000] NET: Registered protocol family 17 [ +0,000001] mpls_gso: MPLS GSO support [ +0,010907] microcode: CPU0: patch_level=0x08001126 [ +0,000006] microcode: CPU1: patch_level=0x08001126 [ +0,000008] microcode: CPU2: patch_level=0x08001126 [ +0,000007] microcode: CPU3: patch_level=0x08001126 [ +0,000006] microcode: CPU4: patch_level=0x08001126 [ +0,000007] microcode: CPU5: patch_level=0x08001126 [ +0,000005] microcode: CPU6: patch_level=0x08001126 [ +0,000007] microcode: CPU7: patch_level=0x08001126 [ +0,000009] microcode: CPU8: patch_level=0x08001126 [ +0,000007] microcode: CPU9: patch_level=0x08001126 [ +0,000008] microcode: CPU10: patch_level=0x08001126 [ +0,000007] microcode: CPU11: patch_level=0x08001126 [ +0,000008] microcode: CPU12: patch_level=0x08001126 [ +0,000007] microcode: CPU13: patch_level=0x08001126 [ +0,000008] microcode: CPU14: patch_level=0x08001126 [ +0,000007] microcode: CPU15: patch_level=0x08001126 [ +0,000031] microcode: Microcode Update Driver: v2.2. [ +0,000120] registered taskstats version 1 [ +0,000000] Loading compiled-in X.509 certificates [ +0,000017] zswap: loaded using pool lzo/zbud [ +0,000448] rtc_cmos 00:02: setting system clock to 2017-08-11 13:00:51 UTC (1502456451) [ +0,000034] PM: Hibernation image not present or could not be loaded. [ +0,001223] Freeing unused kernel memory: 1432K [ +0,000001] Write protecting the kernel read-only data: 12288k [ +0,000369] Freeing unused kernel memory: 1868K [ +0,001930] Freeing unused kernel memory: 1284K [ +0,001040] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ +0,030121] i2c_designware_core: module verification failed: signature and/or required key missing - tainting kernel [ +0,008395] nvme nvme0: pci function 0000:01:00.0 [ +0,000577] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ +0,000035] SCSI subsystem initialized [ +0,000014] ACPI: bus type USB registered [ +0,000017] usbcore: registered new interface driver usbfs [ +0,000005] usbcore: registered new interface driver hub [ +0,000058] usbcore: registered new device driver usb [ +0,001117] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ +0,000001] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection [ +0,000028] libata version 3.00 loaded. [ +0,000158] xhci_hcd 0000:03:00.0: xHCI Host Controller [ +0,000005] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ +0,009184] r8169 0000:21:00.0 eth0: RTL8168h/8111h at 0xffffba5f018d5000, 4c:cc:6a:f4:3f:bd, XID 14100800 IRQ 41 [ +0,000002] r8169 0000:21:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ +0,005938] r8169 0000:21:00.0 enp33s0: renamed from eth0 [ +0,040225] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x08000410 [ +0,000084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ +0,000002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000001] usb usb1: Product: xHCI Host Controller [ +0,000001] usb usb1: Manufacturer: Linux 4.12.5-vanilla xhci-hcd [ +0,000000] usb usb1: SerialNumber: 0000:03:00.0 [ +0,000102] hub 1-0:1.0: USB hub found [ +0,000012] hub 1-0:1.0: 10 ports detected [ +0,000355] xhci_hcd 0000:03:00.0: xHCI Host Controller [ +0,000003] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ +0,000025] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ +0,000016] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ +0,000001] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000001] usb usb2: Product: xHCI Host Controller [ +0,000000] usb usb2: Manufacturer: Linux 4.12.5-vanilla xhci-hcd [ +0,000001] usb usb2: SerialNumber: 0000:03:00.0 [ +0,000081] hub 2-0:1.0: USB hub found [ +0,000014] hub 2-0:1.0: 4 ports detected [ +0,000191] ahci 0000:03:00.1: version 3.0 [ +0,000135] xhci_hcd 0000:24:00.3: xHCI Host Controller [ +0,000003] xhci_hcd 0000:24:00.3: new USB bus registered, assigned bus number 3 [ +0,000051] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled [ +0,000033] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ +0,000002] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ +0,000021] xhci_hcd 0000:24:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000410 [ +0,000067] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ +0,000001] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000001] usb usb3: Product: xHCI Host Controller [ +0,000000] usb usb3: Manufacturer: Linux 4.12.5-vanilla xhci-hcd [ +0,000001] usb usb3: SerialNumber: 0000:24:00.3 [ +0,000101] hub 3-0:1.0: USB hub found [ +0,000006] hub 3-0:1.0: 4 ports detected [ +0,000175] xhci_hcd 0000:24:00.3: xHCI Host Controller [ +0,000002] xhci_hcd 0000:24:00.3: new USB bus registered, assigned bus number 4 [ +0,000009] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ +0,000012] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ +0,000001] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000000] usb usb4: Product: xHCI Host Controller [ +0,000001] usb usb4: Manufacturer: Linux 4.12.5-vanilla xhci-hcd [ +0,000000] usb usb4: SerialNumber: 0000:24:00.3 [ +0,000096] hub 4-0:1.0: USB hub found [ +0,000006] hub 4-0:1.0: 4 ports detected [ +0,000090] scsi host0: ahci [ +0,000125] scsi host1: ahci [ +0,000105] scsi host2: ahci [ +0,000124] scsi host3: ahci [ +0,000147] scsi host4: ahci [ +0,000255] scsi host5: ahci [ +0,000128] scsi host6: ahci [ +0,000137] scsi host7: ahci [ +0,000028] ata1: SATA max UDMA/133 abar m131072@0xfd680000 port 0xfd680100 irq 44 [ +0,000001] ata2: SATA max UDMA/133 abar m131072@0xfd680000 port 0xfd680180 irq 44 [ +0,000001] ata3: DUMMY [ +0,000000] ata4: DUMMY [ +0,000001] ata5: SATA max UDMA/133 abar m131072@0xfd680000 port 0xfd680300 irq 44 [ +0,000002] ata6: SATA max UDMA/133 abar m131072@0xfd680000 port 0xfd680380 irq 44 [ +0,000000] ata7: DUMMY [ +0,000001] ata8: DUMMY [ +0,000111] ahci 0000:25:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ +0,000003] ahci 0000:25:00.2: flags: 64bit ncq sntf ilck led clo only pmp fbs pio [ +0,000184] scsi host8: ahci [ +0,000036] ata9: SATA max UDMA/133 abar m4096@0xfd708000 port 0xfd708100 irq 47 [ +0,170364] nvme0n1: p1 p2 [ +0,141811] ata9: SATA link down (SStatus 0 SControl 300) [ +0,009545] usb 1-9: new high-speed USB device number 2 using xhci_hcd [ +0,152017] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ +0,029929] ata1.00: ATA-8: TOSHIBA MQ01ABD075, AX0R2J, max UDMA/100 [ +0,000001] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ +0,001637] ata1.00: configured for UDMA/100 [ +0,000214] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 2J PQ: 0 ANSI: 5 [ +0,035872] usb 1-9: New USB device found, idVendor=05e3, idProduct=0606 [ +0,000001] usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ +0,000001] usb 1-9: Product: USB2.0 Hub [ +0,003993] hub 1-9:1.0: USB hub found [ +0,003990] hub 1-9:1.0: 4 ports detected [ +0,292380] tsc: Refined TSC clocksource calibration: 3399.997 MHz [ +0,000009] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31024bd20a6, max_idle_ns: 440795346804 ns [ +0,039989] usb 1-9.1: new full-speed USB device number 3 using xhci_hcd [ +0,120013] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ +0,000843] ata2.00: NCQ Send/Recv Log not supported [ +0,000001] ata2.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133 [ +0,000001] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ +0,000321] ata2.00: NCQ Send/Recv Log not supported [ +0,000069] ata2.00: configured for UDMA/133 [ +0,000164] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 5B0Q PQ: 0 ANSI: 5 [ +0,234290] usb 1-9.1: New USB device found, idVendor=046d, idProduct=c52b [ +0,000001] usb 1-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000001] usb 1-9.1: Product: USB Receiver [ +0,000001] usb 1-9.1: Manufacturer: Logitech [ +0,020969] hidraw: raw HID events driver (C) Jiri Kosina [ +0,104040] usbcore: registered new interface driver usbhid [ +0,000000] usbhid: USB HID core driver [ +0,000597] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-9.1/input2 [ +0,138744] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ +0,001434] ata5.00: ATA-8: Hitachi HUA723020ALA641, MK7OA840, max UDMA/133 [ +0,000001] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ +0,001500] ata5.00: configured for UDMA/133 [ +0,000192] scsi 4:0:0:0: Direct-Access ATA Hitachi HUA72302 A840 PQ: 0 ANSI: 5 [ +0,022589] input: Logitech K330 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.2/0003:046D:C52B.0003/0003:046D:4016.0004/input/input0 [ +0,000096] logitech-hidpp-device 0003:046D:4016.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:03:00.0-9.1:1 [ +0,009856] input: Logitech M325 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.2/0003:046D:C52B.0003/0003:046D:400A.0005/input/input1 [ +0,000062] logitech-hidpp-device 0003:046D:400A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M325] on usb-0000:03:00.0-9.1:2 [ +0,021943] input: Logitech M325 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.2/0003:046D:C52B.0003/0003:046D:400A.0006/input/input2 [ +0,000066] logitech-hidpp-device 0003:046D:400A.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M325] on usb-0000:03:00.0-9.1:3 [ +0,021933] input: Logitech M325 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.2/0003:046D:C52B.0003/0003:046D:400A.0007/input/input3 [ +0,000054] logitech-hidpp-device 0003:046D:400A.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech M325] on usb-0000:03:00.0-9.1:4 [ +0,284360] clocksource: Switched to clocksource tsc [ +0,159920] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ +0,000404] ata6.00: ATA-9: SanDisk SDSSDP128G, 3.2.0, max UDMA/133 [ +0,000001] ata6.00: 246162672 sectors, multi 1: LBA48 NCQ (depth 31/32) [ +0,000860] ata6.00: configured for UDMA/133 [ +0,000095] scsi 5:0:0:0: Direct-Access ATA SanDisk SDSSDP12 0 PQ: 0 ANSI: 5 [ +0,025575] ata2.00: Enabling discard_zeroes_data [ +0,000024] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ +0,000001] sd 0:0:0:0: [sda] 4096-byte physical blocks [ +0,000004] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ +0,000006] sd 0:0:0:0: [sda] Write Protect is off [ +0,000000] sd 1:0:0:0: [sdb] Write Protect is off [ +0,000002] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ +0,000000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ +0,000010] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ +0,000009] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ +0,000002] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ +0,000009] sd 4:0:0:0: [sdc] Write Protect is off [ +0,000001] sd 5:0:0:0: [sdd] 246162672 512-byte logical blocks: (126 GB/117 GiB) [ +0,000001] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ +0,000004] sd 5:0:0:0: [sdd] Write Protect is off [ +0,000001] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ +0,000006] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ +0,000003] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ +0,000047] ata2.00: Enabling discard_zeroes_data [ +0,001481] sdb: sdb1 sdb2 < sdb5 > [ +0,000120] ata2.00: Enabling discard_zeroes_data [ +0,000033] sd 1:0:0:0: [sdb] Attached SCSI disk [ +0,000749] sdd: sdd1 [ +0,000110] sd 5:0:0:0: [sdd] Attached SCSI disk [ +0,033712] sdc: sdc1 [ +0,000144] sd 4:0:0:0: [sdc] Attached SCSI disk [ +0,070687] sda: sda1 [ +0,000136] sd 0:0:0:0: [sda] Attached SCSI disk [ +0,001777] random: fast init done [ +0,313927] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ +0,072926] ip_tables: (C) 2000-2006 Netfilter Core Team [ +0,005638] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ +0,000241] systemd[1]: Detected architecture x86-64. [ +0,000095] systemd[1]: Set hostname to . [ +0,046288] systemd[1]: Reached target Swap. [ +0,000263] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ +0,000026] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ +0,000011] systemd[1]: Reached target User and Group Name Lookups. [ +0,000015] systemd[1]: Listening on fsck to fsckd communication Socket. [ +0,000006] systemd[1]: Reached target Remote File Systems. [ +0,000019] systemd[1]: Listening on Syslog Socket. [ +0,008623] lp: driver loaded but no devices found [ +0,000411] EXT4-fs (nvme0n1p1): re-mounted. Opts: errors=remount-ro [ +0,000705] ppdev: user-space parallel port driver [ +0,000548] parport_pc 00:04: reported by Plug and Play ACPI [ +0,000084] parport0: PC-style at 0x378, irq 5 [PCSPP] [ +0,034317] systemd-journald[350]: Received request to flush runtime journal from PID 1 [ +0,010826] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ +0,000004] ACPI: Power Button [PWRB] [ +0,000043] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ +0,000001] ACPI: Power Button [PWRF] [ +0,001056] acpi_cpufreq: overriding BIOS provided _PSD data [ +0,013914] wmi: Mapper loaded [ +0,004374] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ +0,006272] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ +0,000038] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ +0,000033] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ +0,000031] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ +0,006659] random: crng init done [ +0,002744] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ +0,000050] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x59 [ +0,000004] sp5100_tco: I/O address 0x0cd6 already in use [ +0,001538] ccp 0000:24:00.2: enabled [ +0,009312] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ +0,007043] lp0: using parport0 (interrupt-driven). [ +0,000619] nvidia: loading out-of-tree module taints kernel. [ +0,000005] nvidia: module license 'NVIDIA' taints kernel. [ +0,000000] Disabling lock debugging due to kernel taint [ +0,027846] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) [ +0,027579] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ +0,031645] Error: Driver 'pcspkr' is already registered, aborting... [ +0,001134] AVX2 version of gcm_enc/dec engaged. [ +0,000001] AES CTR mode by8 optimization enabled [ +0,004414] nvidia 0000:23:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ +0,000155] nvidia-nvlink: Nvlink Core is being initialized, major device number 246 [ +0,000047] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.82 Wed Jul 19 21:16:49 PDT 2017 (using threaded interrupts) [ +0,000912] snd_hda_intel 0000:23:00.1: Disabling MSI [ +0,000008] snd_hda_intel 0000:23:00.1: Handle vga_switcheroo audio client [ +0,008266] alg: No test for pcbc(aes) (pcbc-aes-aesni) [ +0,003020] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ +0,000000] snd_hda_codec_realtek hdaudioC1D0: inputs: [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ +0,008039] kvm: Nested Virtualization enabled [ +0,000008] kvm: Nested Paging enabled [ +0,001671] MCE: In-kernel MCE decoding enabled. [ +0,002023] EDAC amd64: Node 0: DRAM ECC disabled. [ +0,000001] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ +0,002422] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input7 [ +0,000042] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input8 [ +0,000035] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input9 [ +0,000036] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input10 [ +0,000051] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input11 [ +0,000033] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input12 [ +0,000037] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input13 [ +0,000037] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input14 [ +0,184515] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.82 Wed Jul 19 20:35:11 PDT 2017 [ +0,017042] [drm] [nvidia-drm] [GPU ID 0x00002300] Loading driver [ +0,000003] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:23:00.0 on minor 0 [ +0,156058] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ +0,069638] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ +0,089005] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:23:00.1/sound/card0/input15 [ +0,000052] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:23:00.1/sound/card0/input16 [ +0,294643] vboxdrv: Found 16 processor cores [ +0,017170] vboxdrv: TSC mode is Invariant, tentative frequency 3399958321 Hz [ +0,000002] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000) [ +0,012709] input: lircd-uinput as /devices/virtual/input/input17 [ +0,191299] VBoxNetFlt: Successfully started. [ +0,001469] VBoxNetAdp: Successfully started. [ +0,002423] VBoxPciLinuxInit [ +0,001046] vboxpci: IOMMU found [ +0,063891] IPv6: ADDRCONF(NETDEV_UP): enp33s0: link is not ready [ +0,021798] r8169 0000:21:00.0 enp33s0: link down [ +0,000002] r8169 0000:21:00.0 enp33s0: link down [ +0,000076] IPv6: ADDRCONF(NETDEV_UP): enp33s0: link is not ready [ +1,170038] nvidia-modeset: Allocated GPU:0 (GPU-3fb65ed5-585d-1acb-b759-5ff9de1efb7f) @ PCI:0000:23:00.0 [ +1,663186] r8169 0000:21:00.0 enp33s0: link up [ +0,000008] IPv6: ADDRCONF(NETDEV_CHANGE): enp33s0: link becomes ready [ +0,086177] Guest personality initialized and is inactive [ +0,000051] VMCI host device registered (name=vmci, major=10, minor=55) [ +0,000001] Initialized host personality [ +0,014874] NET: Registered protocol family 40 [ +0,015147] fuse init (API version 7.26) [août11 15:01] logitech-hidpp-device 0003:046D:4016.0004: HID++ 2.0 device connected. [ +22,615923] logitech-hidpp-device 0003:046D:400A.0007: HID++ 2.0 device connected. [août11 17:29] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750